Water Pump Pressure Sensor Element

• Type: Piezoresistive Pressure Sensor
• Component: SemiConductor Type
• For: Diffused Silicon Pressure Transmitter
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HM5201S
• Output Signal Type: Analog Type
• Production Process: Integration
• Material: Stainless Steel
• Thread Type: /
• Wiring Type: Two-Wire
• Measuring Medium: Gas and Liquid
• IP Rating: IP65
• Certification: IATF16949
• Customized: Customized
• Transport Package: Neutral Packing
• Specification: 0~10bar (Customizable)
• Trademark: FLUHANDY
• Origin: China
• HS Code: 9026209090
• Production Capacity: 100000pieces/Month
• Package Size: 20.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 1.000kg

Product Description

HM5201S Civil current type water pump pressure sensor

Civil current type water pump pressure sensor is a current output solution,Civilian current solution, direct outlet (within 400mm).

The pressure sensor for civilian current type water pumps is always installed by installing the sensor on the base. There is no buffer device added to the diaphragm, and some transmitters usually use snap rings to position the sensor.

The pressure sensor component of the water pump has the following beneficial effects: reliable performance, high stability, and no diaphragm damage; Resistant to pipeline impurity corrosion; Good anti icing performance; Small size, low power consumption; The water pump motor has good anti electromagnetic interference performance.

The pressure transmitter component of the water pump adopts a control method to continuously read the working pressure of the water pump, and automatically set the stop pressure of the water pump by increasing the starting pressure of the water pump; It does not require users to manually set the stop pressure of the water pump, which improves the level of automation and improves the efficiency of the water pump. The accuracy of stopping pressure setting can reduce the frequency of starting and stopping the water pump; It also provides a control method for automatically setting the starting pressure of the water pump, further improving the degree of automatic control of the water pump and reducing user operation.

Function and Features
A variety of options are available to meet different needs.
Accurate pressure measurement, high reliability, high stability, high cost performance.
Using dedicated amplifier circuit and excellent temperature compensation technology.
High sensitivity and fast response speed.
CE, ROSH certification.

Product parameters

Work environment
Medium temperature	minimum value  -40 ° C	Maximum value  120 ° C
Storage temperature	minimum value  -40 ° C	Maximum value   85 ° C
Electrical characteristics
power supply	24VDC (customizable)	Current output	4~20mA
Overvoltage voltage (proportional)	30VDC	reverse protection	30VDC
Load Resistance	<700Ω@24VDC
Working characteristics
measuring range	0~3~20bar (customizable)	Overload pressure	150% FS
Static accuracy	±1.5% @ FS (customizable)	Burst pressure	300% FS
Measurable medium	Non corrosive gases or liquids	Comprehensive error	±3.0% FS (customizable)
Mechanical performance
Protection level	IP65	Pressure interface	G3/8 (customizable)

Boundary dimensions and pin definitions

Output characteristic
Matters needing attention

1.The measuring medium cannot be frozen;

2.During installation, avoid scratching the O-ring seal;

3.Do not use media beyond the prescribed limits;

4.The power supply needs to be filtered to prevent damage to this product caused 

by instantaneous high currents;

5. Please do not exceed the specified range of power supply voltage;

6. It is strictly prohibited for cables to bear tension;

7. Avoid falling, hitting, and puncturing hard objects;

8. Avoid product exposure to water and strictly prohibit water immersion;

9.It is strictly prohibited to disassemble the casing to avoid product damage.
Disclaimer

1.Use of media beyond regulations;

2.Exceeding the specified power supply voltage for use;

3.Use beyond the specified temperature range;

4.Use beyond the specified pressure range;

5.Severe deformation or damage to the isolation membrane caused by improper 

operation;

6.Force majeure, such as product damage caused by lightning strikes, etc;

7.Other product damage caused by failure to use in accordance with the requirements 

of this specification.

Note: The accuracy of a product refers to the error rate between the theoretical output value (calculated according to the output formula) and the actual measured value.

That is, accuracy=(measured value - theoretical value)/net output

Net output: 4.5-0.5=4
Jiangmen Ever-smart Intelligent Control Instrument Co., LTD. Founded in 2013, covering an area of 1500 square meters, we are an intelligent manufacturing enterprise that integrates product design, research and development, production, and sales. Our core team has been deeply involved in the field of instruments and meters for more than 20 years.
Since its establishment, our company has been deeply involved in the fields of instruments, sensors, testing equipment, and automation control systems. Currently, our products have covered various categories such as pressure sensors, high-precision digital pressure gauges, high-precision detectors, high-precision pressure controllers, and automated production pressure calibration systems, and continue to develop in a series. At present, we have formed an annual production and quality assurance capacity of 1 million pressure sensor products, and are equipped with a professional product research and development team. Our sales channels cover various parts of the country, the Middle East, Europe, the Americas, and Southeast Asia.
The company has always adhered to the principle of "professional creation of high-quality products, sincere realization of win-win", and always adheres to creating maximum value for customers with leading technology.
Looking towards the future, Hengmin Company will continue to advance, driven by technological innovation and guided by market demand, and strive to create more distinctive brands.